
Product Introduction
The ZKTeco F18 Fingerprint Access Control and Time Attendance Terminal is a biometric fingerprint identification device designed primarily for access-control applications. It provides fingerprint verification, optional card identification, network communication and connections for compatible door-access equipment. It can be installed as a standalone access-control device or connected to a compatible third-party access-control panel that supports standard Wiegand signals.
The ZKTeco F18 is designed for organisations that need to manage access to offices, business premises, restricted areas and other controlled entry points. Its fingerprint verification functionality allows registered users to authenticate using their fingerprints. The device also supports optional card functionality, providing an additional identification method when the appropriate card reader configuration is available.
The manufacturer lists a fingerprint capacity of up to 3,000 templates and an optional card capacity of up to 5,000 cards. The transaction capacity requires confirmation for the specific hardware revision because ZKTeco's official product pages publish different figures. The exact transaction capacity should therefore be checked against the datasheet or firmware configuration supplied with the unit.
The F18 features a 2.4-inch TFT LCD colour screen that displays information and guides users during device operation. It uses a ZK Optical Sensor for fingerprint reading. Its audio-visual indication provides feedback when fingerprints are accepted or rejected, helping users understand the result of the verification process.
For communication and system integration, the F18 supports TCP/IP, RS485, RS232 and USB-host interfaces. It also provides Wiegand input and output, allowing integration with compatible access-control equipment. The device supports connections to third-party electric locks, door sensors, exit buttons, alarms and doorbells.
The F18 supports different software and firmware configurations. Its standard AC Push firmware connects to ZKBio CVAccess, while optional TA Push firmware supports ZKBioTime 8.0 for time-attendance applications. Standalone firmware and software support are also listed by the manufacturer. The exact firmware configuration should be confirmed before purchase because attendance and access-control functionality can depend on the selected configuration.
With its fingerprint verification, optional card support, communication interfaces and door-access connections, the ZKTeco F18 is a practical option for businesses and organisations looking for a biometric access-control solution with optional time-attendance integration.
Specifications & Key Features

Fingerprint Verification
The ZKTeco F18 uses a ZK Optical Sensor for fingerprint identification. Its manufacturer-listed fingerprint capacity is 3,000 templates. This allows registered users to authenticate using their stored fingerprint information.
The device also provides audio-visual feedback for accepted and rejected fingerprints. This helps users identify the outcome of the verification process.
Card Identification
The F18 supports optional card functionality. ZKTeco's newer official product information lists a capacity of up to 5,000 optional cards, including ID, IC, HID Prox and HID iCLASS card types. Card support depends on the selected hardware configuration and compatible card technology.
Display
The terminal features a 2.4-inch TFT LCD colour screen. The display provides an interface for device operation and user interaction.
Communication and Connectivity
The manufacturer lists the following communication interfaces:
TCP/IP
RS232
RS485
USB-host
Wiegand input and output
These interfaces allow the F18 to communicate with compatible networks, software and access-control equipment. RS232 and RS485 functions should be checked against the applicable installation configuration.
Access-Control Connections

The F18 supports connections to compatible third-party access-control equipment, including:
Electric locks
Door sensors
Exit buttons
Alarms
Doorbells
It also supports Wiegand input and output for integration with compatible access-control panels and devices.
Access-Control Functions
Manufacturer-listed functions include:
Some functions and accessories are optional and depend on the device configuration.
Software and Firmware
ZKTeco lists different firmware configurations for the F18:
Standard AC Push firmware with ZKBio CVAccess
Optional TA Push firmware with ZKBioTime 8.0
Standalone SDK
ZKAccess 3.5 software support
The available software functions depend on the firmware and installation configuration. Confirm the required software compatibility before deployment.
Power and Physical Specifications
The manufacturer specifies a 12V DC, 3A power supply. Its operating temperature range is 0°C to 45°C, and operating humidity is 20% to 80%.
The listed physical dimensions are 80 × 183 × 42 mm (W × D × H). Exact product weight is not available in the manufacturer specifications reviewed.
Transaction Capacity
ZKTeco's official regional and global product pages show different transaction capacities for the F18. Therefore, the exact transaction capacity for the supplied unit is not confirmed. Check the specific device datasheet or hardware revision before using a transaction-capacity figure in the product listing.
Best Uses & Suitable Customers
Office Access Control
The ZKTeco F18 is suitable for office environments that require fingerprint-based access verification. It can be installed at designated entry points and connected to compatible electric locks and door sensors.
Business Premises
Businesses can use the terminal as part of an access-control installation to manage entry to designated areas. Its fingerprint identification and optional card support provide different authentication options depending on the selected configuration.
Employee Access Management
Organisations can register authorised users and use fingerprint verification to control access to suitable locations. The device's anti-passback function can also support access-control management.
Time Attendance Applications
The F18 can support time-attendance applications when configured with compatible TA Push firmware and ZKBioTime software. Organisations should confirm that the supplied device includes the required firmware and software configuration before purchasing it specifically for attendance management.
Security System Installations
Security system installers and IT integrators can consider the F18 for projects involving compatible electric locks, door sensors, exit buttons, alarms and Wiegand-supported access-control equipment.
Commercial and Institutional Environments
The device may be suitable for business offices, commercial premises and institutional facilities that require controlled entry and biometric user verification. The final installation should be planned according to the required access-control equipment, network connectivity and software configuration.
Overall, the ZKTeco F18 provides fingerprint-based access verification, optional card identification and multiple communication interfaces in one terminal. It is best suited to installations where the required hardware, firmware and connected access-control equipment have been checked for compatibility.